1. Open the Premis App > Select the lock > click on user icon (upper right) 2. Enter the user name 3. Enter a user code or click on “Generate Random Code” > click on Submit. Add: User code must be between 4-8 digits. 4. Change “Access Type” as required
Read More1. Open the Premis App > Select the lock > click on user icon (lower left side) 2. Select the user name 3. Select “Delete User Code” > click on “Delete” to confirm user code deletion. Steps above will delete the user code as well as the user.
Read MoreNo, the user code recipients can unlock Premis using distinct keypad user codes given at the invitation time.
Read MoreYou can invite up to fifteen(15) Apple HomeKit to access your Premis lock through the Home app. You can also provide up to 30 user access codes using the Premis App.
Read MoreYes, if the lock was initially programmed with a programming code, its settings can be changed from the outside without access to the program button on the interior.
Read MoreMake sure the door is open If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and then keypad will flash green. Press 1 to add a permanent user code that can be used for entry at all times, until deleted. Press 7 to add a one-time user code. A one-time user code may be used only once, which will be deleted immediately after used (typically used in emergency causes when you need to give one-time access to a person). You will hear one short beep and the keypad will flash green. Press Kwikset Enter a new user code. It must be between 4- 8 digits. For security reasons, the first 4 digits of each user code must be unique. For example, you are unable to program a user code 4-8-1-5-1 as well as a user code 4-8-1-5-2. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashed red, it was unsuccessful. Repeat from step 1.
Read MoreIf user codes are disabled (example: when you go on vacation), the lock can ONLY be operated by the key) 1. Make sure the door is open. 2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and the keypad will flash green. 3. Press 6. You will hear one short beep and the keypad will flash green. 4. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from STEP 1.
Read MoreAdd A User Code: Move swiftly during programming. If no digit is pressed for 10 seconds, the system will time out and you will need to restart the procedure. 1) Make sure the door is open. Press and release the program button using the SmartKey tool or a paper clip. You will hear two beeps. 2) Press 1. You will hear one short beep and the keypad will flash green once. 3) Press the Kwikset button4) Enter a user code. It must be between 4-8 digits. WARNING: For security reasons, the first 4 digits of each user code must be unique. For example you are unable to program a user code 1-2-3-4-5 as well as a user code 1-2-3-4-6. 5) Press the Kwikset button 6) You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from step 1.Delete A User Code: 1. Make sure the door is open. 2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. If you have enabled a programming code, enter you programming code, then press Kwikset. You will hear one short beep and the keypad will flash green. 3. Press 2 to delete a user code. You will hear one short beep and the keypad will flash green. 4. Press Kwikset5. Enter the user code you wish to delete. Press Kwikset6. Enter the user code again. 7. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red. It was unsuccessful. Repeat from step 1.Delete All User Codes: 1. Make sure the door is open. 2. If you have not enabled a programming code, press and release the program button. You will hear two beeps. If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and they keypad will flash green. 3. Press 4. You will hear one short beep and the keypad will flash green. 4. Press Kwikset. 5. Enter 9 – 9 – 9 – 9 – 9 – 96. Enter Kwikset. 7. Enter 9 – 9 – 9 – 9 – 9 – 9 8. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from step 1.
Read MoreAdd User Codes: A total of 6 User Codes (and a temporary one-time User Code) may be programmed. Do not program a User Code that is the same as your PC (Programming Code).Make sure your door is open and unlocked1. Enter your Programming Code.2. Press ""Kwikset"" then ""1"" then ""Kwikset""3. Enter a new User Code. It must be between 4 and 10 digits.4. Press ""Kwikset""5. Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping.Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.Make sure your door is open and unlocked1. Enter your existing PC.2. Press ""Kwikset"" then ""2"" then ""Kwikset""3. Enter the User Code you wish to delete.4. Press ""Kwikset""5. Test the code: While your door is open, lock it and enter the User Code to make sure it no longer unlocks the door.For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.Note: If the lock is muted, you will not hear the lock beeping.
Read More