How do I add/delete a user code on my 264 Deadbolt?
Add User Codes:A total of 6 User Codes (and a temporary one-time User Code) may be programmed. Do not program a User Code that is the same as your PC (Programming Code).
Make sure your door is open and unlocked
1. Enter your Programming Code.
2. Press ""Kwikset"" then ""1"" then ""Kwikset""
3. Enter a new User Code. It must be between 4 and 10 digits.
4. Press ""Kwikset""
5. Test the code: While your door is open, lock it and enter your new User Code to make sure it unlocks the door.
For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.
Note: If the lock is muted, you will not hear the lock beeping.
Delete User Codes:
The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.
Make sure your door is open and unlocked
1. Enter your existing PC.
2. Press ""Kwikset"" then ""2"" then ""Kwikset""
3. Enter the User Code you wish to delete.
4. Press ""Kwikset""
5. Test the code: While your door is open, lock it and enter the User Code to make sure it no longer unlocks the door.
For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.
Note: If the lock is muted, you will not hear the lock beeping.