How do I add/delete a user code on my SmartCode 955?
Add A User Code:Move swiftly during programming. If no digit is pressed for 10 seconds, the system will time out and you will need to restart the procedure.
1) Make sure the door is open. Press and release the program button using the SmartKey tool or a paper clip. You will hear two beeps.
2) Press 1. You will hear one short beep and the keypad will flash green once.
3) Press the Kwikset button
4) Enter a user code. It must be between 4-8 digits. WARNING: For security reasons, the first 4 digits of each user code must be unique. For example you are unable to program a user code 1-2-3-4-5 as well as a user code 1-2-3-4-6.
5) Press the Kwikset button
6) You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from step 1.
Delete A User Code:
1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps.
If you have enabled a programming code, enter you programming code, then press Kwikset. You will hear one short beep and the keypad will flash green.
3. Press 2 to delete a user code.
You will hear one short beep and the keypad will flash green.
4. Press Kwikset
5. Enter the user code you wish to delete. Press Kwikset
6. Enter the user code again.
7. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red. It was unsuccessful. Repeat from step 1.
Delete All User Codes:
1. Make sure the door is open.
2. If you have not enabled a programming code, press and release the program button. You will hear two beeps.
If you have enabled a programming code, enter your programming code, then press Kwikset. You will hear one short beep and they keypad will flash green.
3. Press 4. You will hear one short beep and the keypad will flash green.
4. Press Kwikset.
5. Enter 9 – 9 – 9 – 9 – 9 – 9
6. Enter Kwikset.
7. Enter 9 – 9 – 9 – 9 – 9 – 9
8. Press Kwikset. You will hear one long beep and the keypad will flash green if successful. If you hear three beeps and the keypad flashes red, it was unsuccessful. Repeat from step 1.