How to delete all User Codes on my 264 Deadbolt?
If all User Codes are deleted, the lock can only be operated by the key and turnpiece until a new User Code is added.
Make sure your door is open and unlocked
1. Enter your existing PC.
2. Press “Kwikset” then “3” then “Kwikset”
For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.
Note: If the lock is muted, you will not hear the lock beeping