Home / Support / Answers

How to change Auto-Lock time delay on my Powerbolt 2?

How to change Auto-Lock time delay
You can set the Auto-Lock time delay to 10, 20, 30, 40, or 50 seconds.
1. Make sure the lock is unlocked and the door is open.
2. Enter your existing Mastercode.
3. Press the lock button. You will hear one beep.
4. Press 1 - 3.
5. Press the lock button. You will hear one beep.
6. For 10 seconds, press 1.
For 20 seconds, press 3.
For 30 seconds, press 5.
For 40 seconds, press 7.
For 50 seconds, press 9.
7. Press . You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly.