Home / Support / Answers

 How to change Auto-Lock time delay on my 264 Deadbolt?

Make sure your door is open and unlocked
You can set the Auto-Lock time delay between 10 and 99 seconds.
1. Enter your Programming Code.
2. Press “Kwikset” then “6” then “Kwikset”
3. Enter time between 10 and 99 seconds.
4. Press “Kwikset”
For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.
Note: If the lock is muted, you will not hear the lock beeping.