How do I enable/disable autolock on my 264 Deadbolt?
The Auto-Lock feature automatically re-locks your door 30 seconds after unlocking. This feature is off by default.
Make sure your door is open and unlocked
1. Enter your existing Programming Code.
2. Press "kwikset" "5" "kwikset"
3. Repeat steps 1 and 2 to enable or disable Auto-Lock again
For all programming sequences, success is indicated when the Kwikset button flashes green 2 times and you hear 2 beeps.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps.
Note: If the lock is muted, you will not hear the lock beeping.