How do I change the programming code on my 275 Contemporary Deadbolt?

How to change your Programming Code The Programming Code will not unlock your door. It is an added security feature that is used to set up all functions. The default Programming Code is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open. 2. Enter your Programming Code - for new installation, default is 0-0-0-0. 3. Press enter arrow. You will hear one beep. 4. Press 4 . 5. Press enter arrow. You will hear one beep. 6. Enter a new Programming Code. It must be between 4 and 10 digits. 7. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly

Answer

How do I add/delete a one-time User Code on my 275 Contemporary Deadbolt?

How to add a one-time User Code A one-time user code may be used only once, and then it will be deleted immediately after use. 1. Make sure the lock is unlocked and the door is open. 2. Enter your existing Programming Code. 3. Press enter arrow. You will hear one beep. 4. Press 8. 5. Press enter arrow. You will hear one beep. 6. Enter a new User Code. It must be between 4 and 10 digits. 7. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly. How to delete individual User Codes The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code. 1. Make sure the lock is unlocked and the door is open. 2. Enter your existing Programming Code. 3. Press enter arrow. You will hear one beep. 4. Press 2. 5. Press enter arrow. You will hear one beep. 6. Enter the User Code you wish to delete. 7. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly. 8. Test the code: While your door is open, lock it. Enter the User Code, then press the Lock symbol. The door should not unlock.

Answer

How do I add/delete a user code on my 275 Contemporary Deadbolt?

How to add an User Codes A total of 30 User Codes may be programmed. Do not program a User Code that is the same as your Programming Code. CAUTION: A User Code is used to unlock the door while a Programming Code is a password for making changes to the lock features. 1. Make sure the lock is unlocked and the door is open. 2. Enter your Programming Code - for new installation, default is 0-0-0-0. 3. Press enter arrow. You will hear one beep. 4. Press 1. 5. Press enter arrow. You will hear one beep. 6. Enter a new User Code. It must be 4-10 digits. 7. Press enter arror. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly. 8. Test the code: While your door is open, lock it. Wake the screen and touch the random lit digits.Enter your new User Code, then press the Lock symbol. The door should unlock. How to delete an User Code The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code. 1. Make sure the lock is unlocked and the door is open. 2. Enter your existing Programming Code. 3. Press enter arrow. You will hear one beep. 4. Press 2. 5. Press enter arrow. You will hear one beep. 6. Enter the User Code you wish to delete. 7. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly. 8. Test the code: While your door is open, lock it. Enter the User Code, then press the Lock symbol. The door should not unlock.

Answer

How to delete all User Codes on my 275 Contemporary Deadbolt?

How to delete all User Codes CAUTION: A User Code is used to unlock the door while a Programming Code is a password for making changes to the lock features. 1. Make sure the lock is unlocked and the door is open. 2. Enter your Programming Code - for new installation, default is 0-0-0-0. 3. Press enter arrow. You will hear one beep. 4. Press 3. 5. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly. For a new installation, this will delete the default User Code 1-2-3-4. For subsequent instances, this will delete all User Codes in the lock. Now the lock can only be operated by the key and turnpiece until a new User Code is added.

Answer

How to enable/disable User Codes on my 275 Contemporary Deadbolt?

How to enable/disable User Codes If User Codes are disabled (example: when you go on vacation), the lock can only be operated by the key and turnpiece until they are enabled again. 1. Make sure the lock is unlocked and the door is open. 2. Enter your existing Programming Code. 3. Press enter arrow. You will hear one beep. 4. Press 7. 5. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly.

Answer

On my 275 Contemporary, the door can be locked with the Lock symbol, but the User Code will not unlock the door.

Make sure that the hole in the door frame behind the strike is drilled at least 1 inch (25 mm) deep. Also make sure the strike plate is aligned with the latch bolt. If needed, reposition the strike.

Answer

On my 275 Contemporary, after the lock has been working normally, the latch bolt locks up and the turnpiece will not rotate.

Enter your Programming Code. Press enter arrow. You will hear one beep. Press 0. Press enter arrow. You will hear two beeps. The latch bolt will extend and retract to learn the orientation of the door. If successful, you will hear 2 beeps. If unsuccessful, you will hear 3 beeps (make sure the door is open and unlocked and that you are using a fresh set of batteries).

Answer

How to set locking and unlocking direction on my 275 Contemporary Deadbolt?

How to set a locking and unlocking direction? To activate the screen, touch screen with palm or back of hand until digits illuminate. While the door is OPEN and UNLOCKED, activate the screen. Enter the following code to teach the lock the orientation of the door: Enter your programming code. Press enter arrow. You will hear one beep. Press 0. Press enter arrow. The latch bolt will extend and retract. If successful, you will hear 2 beeps. If unsuccessful, you will hear 3 beeps. If batteries are low, you will hear 10 beeps. If unsuccessful, make sure the door is unlocked and that you are using a fresh set of batteries. If successful, activate the screen. Press the Lock symbol. The latch bolt will extend to lock. Activate the screen. Touch the random digits that appear (this is a security feature that ensures fingerprints are spread around the entire screen). Enter the default User Code (1-2-3-4), then press the Lock symbol. The door will unlock.

Answer

How to enable/disable Auto-Lock on my 275 Contemporary Deadbolt?

How to enable/disable Auto-Lock The Auto-Lock feature automatically re-locks your door 30 seconds after unlocking. This feature is off by default. 1. Make sure the lock is unlocked and the door is open. 2. Enter your existing Programming Code. 3. Press enter arrow. You will hear one beep. 4. Press 5. 5. Press enter arrow. You will hear two beeps if successful. If you hear three beeps, it was unsuccessful. Repeat from step 1 slowly.

Ultimate control.

Get support.

275 Contemporary Touchscreen Deadbolt

Finishes

Documents

Installation Guide - English

Installation Guide - Spanish

Answers

How do I change the programming code on my 275 Contemporary Deadbolt?

How do I add/delete a one-time User Code on my 275 Contemporary Deadbolt?

How do I add/delete a user code on my 275 Contemporary Deadbolt?

How to delete all User Codes on my 275 Contemporary Deadbolt?

How to enable/disable User Codes on my 275 Contemporary Deadbolt?

On my 275 Contemporary, the door can be locked with the Lock symbol, but the User Code will not unlock the door.

On my 275 Contemporary, after the lock has been working normally, the latch bolt locks up and the turnpiece will not rotate.

How to set locking and unlocking direction on my 275 Contemporary Deadbolt?

How to enable/disable Auto-Lock on my 275 Contemporary Deadbolt?

Community Q&As

Connect with us.