Answer On my Smartcode 888, the lock button flashes green with continuous beeping sound for two seconds. The door jammed while attempting to lock. Please manually re-lock the door. If needed, reposition the strike. Read More
Answer On my Smartcode 888, the lock button flashes red three times with three beeps. There are two reasons for this to occur: 1. No user code programmed. Program at least one user code. 2. Either programming timeout after five seconds or unsuccessful programming. You should attempt the programming procedure again. Read More
Answer On my Smartcode 888, the lock button flashes red once with a beep. You may have entered an incorrect code. Please reenter the code. Read More
Answer On my Smartcode 888, the lock button flashes red 15 times with 15 beeps. You’ve entered three incorrect codes within one minute. Please re-enter your code after 60 seconds keypad lockout. Read More
Answer On my Smartcode 888, the lock button flashes red with fast beeping sounds for three to four seconds This is a low battery alert. Please replace you batteries. Read More
Answer How to mute/unmute lock on my Smartcode 888? Audio is on by default. How to mute/unmute audio 1. Press program button once. 2. Press button ‘A’ once. 3. Press button ‘5-6’ multiple times. If needed to reach desired stat. Green lock button means feature is enabled. Red lock button means feature is disabled. 4. Press Lock button once Read More
Answer How to enable/disable Auto-Lock on my Smartcode 888? Auto-lock automatically re-locks the door after unlocking. This feature is set to 30 seconds and is turned off by default. 1. Press program button once 2. Press button ‘A’ once 3. Press button ‘3-4’ multiple times if needed to reach desired state. Green lock button means feature is enabled. Red lock button means feature is disabled. 4. Press lock button once. Read More
Answer How to preform a manual door handing on my Smartcode 888? If needed, the door handing process can be initiated manually. This is useful if the lock is being moved to a different door. 1. Remove battery pack. 2. Press and HOLD the program button while reinserting the battery pack. Release button once battery pack is installed. The status LED will flash red and green. 3. Press the program button once more. 4. The latch bolt will extend and retract to learn the orientation of the door. The Status LED will indication success or failure Success: flashes green Failure: flashes red Read More
Answer How to change Auto-Lock time delay on my Smartcode 888? Auto-lock automatically re-locks the door after unlocking. This feature is set to 30 seconds and is turned off by default. 1. Press program button once 2. Press button ‘A’ once 3. Press button ‘9-0’ once. 4. Press button once that corresponds to desired time delay: ‘1-2’ = 30 sec ‘3-4’ = 60 sec ‘5-6’ = 90 sec ‘7-8” = 120 sec ‘9-0’ = 180 sec 5. Press lock button once Read More
Answer How to turn on/off the LED light on my Smartcode 888? Status LED The status LED blinks every 6 seconds to communicate whether the door is locked or unlocked. This feature is on by default. Turn Status LED on/off 1. Press programming button once 2. Press button ‘A’ once. 3. Press button ‘1-2’ multiple times if needed to reach desired state. Green lock button means feature is enabled. Red lock button means feature is diabled. 4. Press lock button once. Read More
Web Page Remote Access & Keyless Entry Smart Locks | Z-Wave Technology for Vivint | Kwikset Smart Front-Door Security with Vivint by Kwikset. Our smart locks have keyless entry and remote access, including locks enabled with Z-Wave Technology. Read More
Web Page Remote Access & Keyless Entry Smart Locks | Z-Wave Technology for ZEGO Smart | Kwikset Control your lock with ZEGO Smart by Kwikset. Our smart locks have keyless entry and remote access, including locks enabled with Z-Wave Technology. Read More