2 Finishes 260 Smartcode Traditional Electronic Deadbolt with Tustin Lever Signature Series 4 Details Support
2 Finishes 260 Smartcode Contemporary Electronic Deadbolt with Halifax Lever Signature Series 2 Details Support
2 Finishes 260 Smartcode Traditional Electronic Deadbolt with Hancock Knob Signature Series Details Support
4 Finishes Ladera and Deadbolt Interior Pack (Square) - Right Handed - Deadbolt Keyed One Side - for Kwikset Series 687 and 800 Handlesets Security Series Details Support
Answer Why am I having trouble programming my Powerbolt 260? Why am I having trouble using or programming my SmartCode 260? If your SmartCode 260 isn’t working as expected, check whether you’re experiencing any of the following: Trouble programming codes Flashing lights on the keypad Beeping during programming Latch bolt not extending or retracting Interior turn‑piece is difficult to turn Keypad stops responding Key is hard to turn in key cylinder Lock only works when key is inserted These symptoms are often caused by an installation issue. Follow the steps below to help resolve it: Open the door and rotate the latch to either the locked or unlocked position, whichever is easiest to turn to, based on the lock’s tension. After locking or unlocking, Remove the Keys from the key cylinder and slide the interior cover off. Unscrew and unmount the interior assembly of the lock. Ensure the cable is securely plugged in and tucked in clear from the flat blade. Rotate the turn-piece before installing it on the door to ensure it’s oriented in the correct direction to match the flat blade. Insert flat blade into turn piece shaft. If the latch bolt is LOCKED, turn piece should be VERTICAL. If latch bolt is UNLOCKED, turn piece should be HORIZONTAL. Ensure to use the correct screws when reinstalling the interior assembly. Using the pointed screws will damage the product. After mounting the interior assembly, ensure that fresh batteries are fully installed in the correct orientation. Complete the Door Rehanding Process so the lock can learn the correct locking and unlocking direction for your door. Press the Programming Button once, the 0 button once and the lock button once. Note: Please check your door’s alignment and the jamb hole depth to prevent any jamming errors: https://www.kwikset.com/support/answers/how-do-i-check-door-alignment-for-my-smart-lock Program the User Code: Make sure the interior cover is off. Press the Program button once. Press the Programming Button once, press the number 1 button once, press the lock button once, enter the User Code of your choice (4-8 digits), press the lock button once. Test the User Code while the door is open. To lock the deadbolt, press the “Lock” button at the top of the keypad and to unlock the deadbolt, enter your User Code. If you are still unable to program your lock, you may need to reset it and start fresh. Follow the Factory Reset steps with the door open and unlocked. Complete steps 8, 9, and 10 after the Factory Reset. Reference 19 of the Installation and User Guide for additional programming features. Powerbolt 260 Installation and User Guide: Installation instructions. Read More
Answer Do the Powerbolt 240 and Powerbolt 250 feature Microban? No, only the SmartCode 260 has Microban antimicrobial protection. Read More