Do I Need To Calibrate The Kevo Fob With The Lock?

While it is not necessary to calibrate the Kevo fob, it is recommended to do so for enhanced security purposes.The calibration process enables Kevo’s inside-outside security feature. When enabled, Kevo’s sensor helps prevent your door from being unlocked by unauthorized users while your Fob is inside your home.If the calibration results in a red flashing light ring at the end of the third touch sequence, then a poor calibration was performed. This could be due to where you are carrying your Kevo fob. You can accept a poor calibration, however accepting a poor calibration is not advised and could cause Kevo to be susceptible to unauthorized operation while your Kevo fob is inside of your home. If you continue to have calibration issues, please call Kevo support.

Answer

How To Calibrate A Kevo Fob?

This process calibrates your Kevo fob based on where you normally keep it when you want to enter your door.1. Remove the battery cover from your lock, hold your Kevo fob to the back panel and press the white calibrate button on the top right side of the back panel. The Kevo fob will begin to blink red.2. Put the battery cover back on the lock.3. Stand outside and close the door. The light ring on the Kevo lock should be solid green.3. Put your Kevo fob where you would normally have it when you are going to enter your door (pocket, purse, backpack etc…).4. Touch the outside of your lock. The light ring should spin green. Once it turns solid green, repeat the touch sequence 2 more times.5. When you are finished, the light ring will flash green and the Kevo lock will beep 3 times (if sound is turned on). Your Kevo fob is now calibrated.If the calibration results in a red flashing light ring at the end of the third touch sequence, then a poor calibration was performed. This could be due to where you are carrying your smart device/Kevo fob. You can accept a poor calibration, however accepting a poor calibration is not advised and could cause Kevo to be susceptible to unauthorized operation while your smart device/Kevo fob is inside of your home. If you continue to have calibration issues, call Kevo support.

Answer

Can The Kevo Fob Get Wet?

The Kevo fob is designed to be water-resistant.

Answer

Do I Need To Enroll The Included Kevo Fob With The Kevo Smart Lock?

The Kevo fob that came with your lock was already enrolled with your lock in the factory. You only need to push the button on the Kevo fob once to activate it. Once activated, it is recommended that you calibrate your fob to enable Kevo's inside-outside security functionality.

Answer

How Do I Delete A Kevo Fob?

In order to unenroll a Kevo fob from your Kevo lock, you must perform a reset of the Kevo Smart Lock, which will delete all eKeys and unenroll all enrolled Kevo fobs.Please follow the step by step instructions or our easy to use interactive guide to learn how to reset your Kevo Smart Lock

Answer

How Do I Disable A Lost Or Stolen Kevo Fob From Working With My Kevo Smart Lock?

If your Kevo fob is lost or stolen, it is recommended that you reset your Kevo lock. Resetting your Kevo will delete all eKeys and Kevo fobs associated with the lock. Please follow the step by step instructions or our easy to use interactive guide to learn how to reset your Kevo Smart Lock NOTE: You can resend all previously sent eKeys at no charge, as eKeys never expire from your Kevo account.

Answer

If My Kevo Fob Is Inside But Located Near The Door, Can Someone Activate Kevo And Unlock The Door?

The Kevo lock has a unique inside-outside sensor to detect if the authorized user is inside or outside of the house. Performing the calibration process on your Kevo fob will enable this feature and fine tune Kevo's sensors, minimizing the potential for accidental unlocking from outside by an unauthorized user. Certain home configurations may impede the Kevo lock’s sensor more than others. For example: Your home office is located next to your entryway, and part of the office extends past the front door, jutting into the front yard. If your Kevo fob is being actively used in that office extension, the Kevo lock’s sensor could possibly detect the Kevo fob as being outside of your home while that Kevo fob is in active use.

Answer