Do not use prints made from this website to mark distances.
Due to individual printers, dimensions on installation instructions may not print
at an accurate scale.
Kwikset products are backed by one of the most comprehensive warranty programs available. You can feel confident that with the purchase of Kwikset you have selected the best quality product, backed by the best customer service available.
This product comes with a lifetime mechanical and finish warranty to the original residential user of Kwikset against defects in material and workmanship as long as the original user occupies the residential premises upon which the product was originally installed. One year electronic warranty. This warranty DOES NOT COVER scratches; abrasions; deterioration due to the use of paints, solvents or other chemicals; abuse; misuse; or product(s) used in commercial applications. Upon return of a defective product to Kwikset Corporation, Kwikset may repair or replace the product or refund the purchase price. Kwikset is not liable for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. If a mechanical or finish defect occurs, please call 1-800-327-LOCK (5625) in the U.S. and Canada or return it to Kwikset Corporation, Consumer Services, 19701 Da Vinci, Lake Forest, CA 92610. For customers outside of the U.S. and Canada, claims under this warranty must be made only to either the place of purchase or to the listed importer.
19701 Da Vinci
Lake Forest, CA 92610
Some of our product families have available specialty functions. The specialty products
listed below can be ordered through our Wholesale or Distribution Partners. Please refer to our
printed catalog for complete specialty products availability.
750CN 15 SMT
Cameron Vestibule Knob in Satin Nickel
741CN 15 SMT
Cameron Free Interior Keyed Entry Knob in Satin Nickel
Keyed Entry Knob, Free Interior
Cameron Keyed Entry Knob in Satin Nickel is rated out of 5 by 1.
Rated 5 out of 5
by Omaha Homeowner
from So Useful! I have several of these smart keyed knobs. I use several and varied alternate keys depending on for what occasion and which rooms I need to secure. Thank you Kwikset!
Date published: 2015-02-28
I have a 2 inch thick door will a stander knob work???
Hello Smutz,Kwikset knobs can fit doors that are 1 3/8" to 1 3/4" standard. You can get a thick door kit to allow the knob to fit on a door that is up to 2 1/4" thick. To request a thick door kit please call Kwikset Consumer Services at 1-800-327-5625.Thank you,Kwikset Support
Date published: 2015-08-24
I have a 10973 keyed knob. How do I change the mechanism for a right or left hand door? Jimp
Hello Jimp,Thank you for your interest in Kwikset products. Kwikset does offer a tool to flip the cylinder on the knob called a cylinder removal tool. Please contact Kwikset Support at 1-800-327-5625.Thank you,Kwikset Support
Date published: 2015-08-10
My door has a Kwikset Dorian lockset with external key and internal turn button. I need to replace the inside lever with a knob to clear an add-on enclosed mini-blind. Will an inside knob & turn button from one of your knob locksets fit my lever lock?
Hello JWR,If you want to replace the lever with a knob, the interior and exterior must be knob to knob. Kwikset knob to lever will not be compatible with each other. A purchase of an entire keyed entry knob will have to be done in this case.Thank you,Kwikset Support
Date published: 2015-08-06
I want to buy a Kwikset keyed lockset for an entry door, my old lock set measures 5" out from the edge of the door. What do I need to make this work.
Hello Andy1973,All Kwikset adjustable latches require a backset of either 2 3/8" or 2 3/4". Kwikset does make an extended 5" latch part # 83014 that requires a face plate. For the most up to date pricing and availability please visit your local home improvement special order counter or our Where to Buy page: http://www.kwikset.com/where-to-buy.aspxThank you,Kwikset Support
Date published: 2015-07-21
I have cameron keyed door lock in our kitchen to garage. The knob is working good but the parts that keep the door closed is sticking and not close easy. I replaced this lock about 2 to 4 year threw home depot. Can I get a 6wal satin Nickel replacement
Hello tommyd,Kwikset covers their locks under a Limited Lifetime Warranty. For assistance in troubleshooting your lockset and warranty support please contact Kwikset Consumer Service at 1-800-327-5625.Thank you,Kwikset Support
Date published: 2015-07-15
My front door is only 1 1/4 wide. I need a door knob set and deadbolt to fit. Problem also is that its an old door and has the old extra long keyhole cutout in the door. So i need something long enough to cover that up Wondering if a rose cover would work
Hello rebecca,Kwikset products will function properly on a door thickness of 1-3/8" to 1-3/4". However, Kwikset does have knobs that will accommodate a thinner door of 1" to 1-1/2" max, such as a mobile home these models will that the letter "M" after the series.Thank you,Kwikset Support
Date published: 2015-07-15
When knob is locked and it is turned from the inside, does this unlock the knob or do you have to turn the lock? When knob is locked and the knob is turned from the inside, then the door is closed after walking out the door, is the door still locked?
Hi Altech,The 740CN knob is a keyed entry function. When the turn piece on the inside is unlocked the knob remains unlocked even if you walk outside and close the door behind you. The knob will remain unlocked until it is physically locked by either turning the turn piece on the inside to the locked mode or locked with the key on the outside. If you were looking for a specific function or different options, please visit our page at:http://www.kwikset.com/how-to-choose/functions-and-applications.aspxThank you,Virginia O.Kwikset Support Team
Date published: 2015-07-14
Exterior front entry door with knob keyed entry. *** inset 5 inch** Bore 1" door 1 5/8 " thick What knobs work go this?
Hello Robo,The standard door prep for all Kwikset Models is borehole 2-1/8", door thickness 1-3/8" to 1-3/4" and backset at 2-3/8" to 2-3/4". Kwikset does offer a back set of 5" and a thick door kit for 2-1/4". For further assistance please contact Kwikset Consumer service at 1-800-327-5625.Thank you,Kwikset Support
Date published: 2015-06-27